一，了解模具的工作原理及使用方法，正确操作，如果有不懂的要及时和厂家的技术顾问了解并且解决。
First, understand the working principle and use method of the die, correct operation, if you do not know, you should timely understand and solve with the technical consultant of the manufacturer.
二，检查模具是否有磨损变形有杂质，如果变形或者没有清理干净就进行使用的话，混凝土护栏钢模具生产出的产品并不光滑平整；
Second, check whether there are any abrasion deformation and impurities in the die. If the die is deformed or used without cleaning up, the products produced by the steel die for concrete guardrail are not smooth and smooth.
三，将模具放置于一个平整的地方，减少震动和噪音对整体形状的影响；
3. Place the mould in a flat place to reduce the impact of vibration and noise on the overall shape.
四，做好日常维护保养，使用完毕后清除残渣废料，不能暴晒受潮；
Fourth, do a good job of daily maintenance, after use, remove residues and waste, not exposed to sunlight and damp;
五，在出现故障的时候及时送检，根据受损情况维修或者更换。
Fifth, in the event of failure, timely inspection, repair or replacement according to the damage.
六，混凝土护栏塑料模具的保存也十分重要，在存储模具的地方要应干燥通风，地面平整，干净整洁，有充分的采光或足够的照明，其中的通道能够有足够的空间，便于调运模具，而且每次调用的时候应该有记录，什么时候出库，什么时候入库，使用情况，有无损坏等等都需要记录。
Sixth, it is also very important to preserve the plastic mould for the concrete guardrail. In the place where the mould is stored, it should be dry and ventilated, the ground level, clean and tidy, with sufficient lighting or sufficient lighting. The passageway can have enough space to facilitate the transfer of the mould. And every time it is used, it should be recorded when it comes out. Repositories, when to store, usage, non-destructive and so on need to be recorded.
七，在进行生产制作时一定要放在平地上，方式其变形倾斜，不能站立。
Seventh, in the production process must be placed on the flat ground, the way its deformation tilt, can not stand.