中央分隔带护栏钢模具的主要内容包含了铁路、高速公路使用的混凝土护栏情况，一般高速公路使用的护栏模板全部采用的钢模板焊接技术，而铁路使用的混凝土护栏多为使用防护栅栏塑料模具预制而成的。该护栏模板简介主要是针对高速公路使用的护栏钢模板情况而言，从不同的高速公路以及设计图纸的不同上可以看出来，有些采用预制，有些则采用现场浇筑的生产方式，二两侧的防撞护栏与中央护栏又有明显的区别，按照对这种护栏的制作要求，需要制作不同的护栏钢模板来满足公路两侧以及中间分隔的需求。混凝土护栏的使用有效的满足了对与分离车道，保障交通有序进行的要求，而两侧的防撞护栏也满足了安全的需求。
The main contents of the steel mould with guardrail in the central partition include the concrete guardrail used in railway and expressway. The welding technology of steel formwork is used in all the guardrail formwork used in expressway, while the concrete guardrail used in railway is mostly prefabricated with plastic mould of guardrail. The brief introduction of the guardrail formwork is mainly aimed at the situation of the guardrail steel formwork used in expressway. It can be seen from the differences of different expressways and design drawings that some of them adopt prefabrication, some adopt on-site pouring production mode, and there are obvious differences between the two sides of the guardrail and the central guardrail. According to the requirements for the production of this guardrail, it is necessary to make different ones. The guardrail steel formwork meets the needs of both sides and the middle of the road. The use of concrete barriers effectively meets the requirements of separating lanes from traffic lanes and ensuring orderly traffic, while the anti-collision barriers on both sides also meet the safety requirements.