水泥隔离带模具在进行生产之前需要备齐所有的原材料,这就包括主要的钢材,以及焊条焊丝等等,除此之外,我们在预制完成以后往往会在水泥制品上刷上一-层油漆,所以我们也要准备好需要用到了油漆,我们会将这些材料放到制作的现场,由专业的设计人员对设计图纸进行更改,对材料进行验收,我们验收的标准就是原材料是否符合图纸的规格和型号, 还有材料的质量是否达标。水泥隔离带模具在对钢材进行检验的时候要采取样本进行,采用的方式就是超声波的检查,看看钢面板的质量是不是合格,只要合格的产品才能投入生产。
Before the production of the cement isolation belt mold, all the raw materials need to be prepared, including the main steel, welding rod, welding wire, etc. in addition, after the prefabrication, we often brush a layer of paint on the cement products, so we also need to prepare the paint that needs to be used. We will put these materials on the production site, and the design drawings will be made by professional designers. Change and accept the materials. Our acceptance standard is whether the raw materials meet the specifications and models of the drawings, and whether the quality of the materials meets the standards. When the cement isolation belt mold is inspecting the steel, it needs to take samples. The method is ultrasonic inspection to see whether the quality of the steel panel is qualified. Only qualified products can be put into production.