| 防撞墙模具是一种生产塑料制品的工具 |
| 添加时间：2019/8/16 16:47:30 浏览次数： |
| 防撞墙模具是一种生产塑料制品的工具.它由几组零件部分构成,这个组合内有成型模腔.注塑时,模具装夹在注塑机上,熔融塑料被注入成型模腔内,并在腔内冷却定型,然后上下模分开,经由顶出系统将制品从模腔顶出离开模具,最后模具再闭合进行下一次注塑,整个注塑过程是循环进行的 The anti-collision wall mold is a tool for producing plastic products. It consists of several sets of parts. This combination has a forming cavity. During injection, the mold is clamped on the injection machine, the molten plastic is injected into the forming cavity, cooled and shaped in the cavity, then the upper and lower molds are separated, and the products are ejected from the cavity through the ejection system. Finally, the mold is ejected from the mold. The whole injection process is cyclic when the mould is closed again for the next injection. |
| 上一页 隔离带构成参数 |
| 下一页 在双边丝护栏网的制作基础上增加了用丝量和卷圈工艺 |
Copyright © 技术支持：遨游网络